commit - 307d022e30a0d0797da4fe392e69172cba12e890
commit + c4295aa38feab553697a0766ee2aea18fed540e1
blob - 0facd1e7a225ba09f1207f2633ea6c1c5c73ada3 (mode 644)
blob + /dev/null
--- makeEspArduino.mk
+++ /dev/null
-#====================================================================================
-# makeESPArduino
-#
-# A makefile for ESP8286 and ESP32 Arduino projects.
-# Edit the contents of this file to suit your project
-# or just include it and override the applicable macros.
-#
-# License: LGPL 2.1
-# General and full license information is available at:
-# https://github.com/plerup/makeEspArduino
-#
-# Copyright (c) 2016-2017 Peter Lerup. All rights reserved.
-#
-#
-# Changed to run on OpenBSD
-#
-#====================================================================================
-
-#====================================================================================
-# Project specfic values
-#====================================================================================
-
-# Include possible project makefile. This can be used to override the defaults below
--include $(firstword $(PROJ_CONF) $(dir $(SKETCH))config.mk)
-
-#=== Default values not available in the Arduino configuration files
-
-PREFIX = /usr/local/share
-
-CHIP ?= esp8266
-ESP_ROOT ?= $(PREFIX)/espressif/$(CHIP)
-
-# Set chip specific default board unless specified
-BOARD ?= $(if $(filter $(CHIP), esp32),esp32,generic)
-
-# Serial flashing parameters
-UPLOAD_PORT ?= /dev/ttyU0
-UPLOAD_VERB ?= -v
-
-# Output directory
-BUILD_ROOT ?= /tmp/mkESP
-BUILD_DIR ?= $(BUILD_ROOT)/$(MAIN_NAME)_$(BOARD)
-
-# File system source directory
-FS_DIR ?= $(dir $(SKETCH))data
-FS_REST_DIR ?= $(BUILD_DIR)/file_system
-
-# Bootloader
-BOOT_LOADER ?= $(ESP_ROOT)/bootloaders/eboot/eboot.elf
-
-# LIB locations
-ARDUINO_ROOT = $(PREFIX)/arduino
-ARDUINO_LIBS = ${ARDUINO_ROOT}/libraries
-LOCAL_LIBS = ./
-CUSTOM_LIBS = /home/basepr1me/Arduino/libraries
-ESP_LIBS = $(ESP_ROOT)/libraries
-
-# ESP Arduino directories
-MKSPIFFS_PATH := $(lastword $(wildcard $(ESP_ROOT)/tools/mkspiffs/*))
-SDK_ROOT = $(ESP_ROOT)/tools/sdk
-TOOLS_ROOT = $(ESP_ROOT)/tools
-
-# OTA parameters
-ESP_ADDR ?= ESP_123456
-ESP_PORT ?= 8266
-ESP_PWD ?= 123
-
-# HTTP update parameters
-HTTP_ADDR ?= ESP_123456
-HTTP_URI ?= /update
-HTTP_PWD ?= user
-HTTP_USR ?= password
-
-#====================================================================================
-# Standard build logic and values
-#====================================================================================
-
-START_TIME := $(shell perl -e "print time();")
-OS ?= $(shell uname -s)
-
-# Utility functions
-time_string = $(shell date +$(1))
-find_files = $(shell find $2 | awk '/.*\.($1)/')
-
-
-ifeq ($(wildcard $(ESP_ROOT)/cores/$(CHIP)),)
- $(error $(ESP_ROOT) is not a vaild directory for $(CHIP))
-endif
-
-ESPTOOL ?= $(shell which esptool.py 2>/dev/null || which esptool 2>/dev/null)
-ifneq ($(ESPTOOL),)
- # esptool exists in path, overide defaults and use it for esp8266 flash operations
- ifeq ($(CHIP),esp8266)
- ESPTOOL_COM = $(ESPTOOL)
- UPLOAD_COM = $(ESPTOOL_PATTERN) --before no_reset --after soft_reset write_flash 0x00000 $(BUILD_DIR)/$(MAIN_NAME).bin
- FS_UPLOAD_COM = $(ESPTOOL_PATTERN) --before no_reset --after soft_reset write_flash $(SPIFFS_START) $(FS_IMAGE)
- endif
-endif
-ESPTOOL_PATTERN = echo Using: $(UPLOAD_PORT) @ $(UPLOAD_SPEED) && "$(ESPTOOL_COM)" --baud=$(UPLOAD_SPEED) --port $(UPLOAD_PORT) --chip $(CHIP)
-
-ifeq ($(MAKECMDGOALS),help)
- DEMO=1
-endif
-ifdef DEMO
- SKETCH := $(if $(filter $(CHIP), esp32),$(ESP_LIBS)/WiFi/examples/WiFiScan/WiFiScan.ino,$(ESP_LIBS)/ESP8266WebServer/examples/HelloServer/HelloServer.ino)
-endif
-SKETCH ?= $(wildcard *.ino)
-ifeq ($(SKETCH),)
- $(error No sketch specified or found. Use "DEMO=1" for testing)
-endif
-ifeq ($(wildcard $(SKETCH)),)
- $(error Sketch $(SKETCH) not found)
-endif
-ESP_ARDUINO_VERSION = $(shell pkg_info | grep arduino-$(CHIP) | cut -d' ' -f1)
-ifeq ($(CHIP),esp8266)
- XTENSA = lx106
-else
- XTENSA = esp32
-endif
-XTENSA_VERSION := $(shell pkg_info | grep xtensa-$(XTENSA)-elf | cut -d' ' -f1)
-
-# Main output definitions
-MAIN_NAME := $(basename $(notdir $(SKETCH)))
-MAIN_EXE = $(BUILD_DIR)/$(MAIN_NAME).bin
-FS_IMAGE = $(BUILD_DIR)/FS.spiffs
-
-# Build file extensions
-OBJ_EXT = .o
-DEP_EXT = .d
-
-# Auto generated makefile with Arduino definitions
-ARDUINO_MK = $(BUILD_DIR)/arduino.mk
-
-# Special tool definitions
-OTA_TOOL ?= $(TOOLS_ROOT)/espota.py
-HTTP_TOOL ?= curl
-
-# Core source files
-CORE_DIR = $(ESP_ROOT)/cores/$(CHIP)
-CORE_SRC := $(call find_files,S|c|cpp,$(CORE_DIR))
-CORE_OBJ := $(patsubst %,$(BUILD_DIR)/%$(OBJ_EXT),$(notdir $(CORE_SRC)))
-CORE_LIB = $(BUILD_DIR)/arduino.ar
-
-SKETCH_DIR = $(dir $(SKETCH))
-
-# User defined compilation units and directories
-ifeq ($(LIBS),)
- # Automatically find directories with header files used by the sketch
- LIBS := $(shell perl -e 'use File::Find;@d = split(" ", shift);while (<>) {$$f{"$$1"} = 1 if /^\s*\#include\s+[<"]([^>"]+)/;}find(sub {if ($$f{$$_}){print $$File::Find::dir," ";$$f{$$_}=0;}}, @d);' \
- "$(CUSTOM_LIBS) $(LOCAL_LIBS) $(ESP_LIBS) $(ARDUINO_LIBS)" $(SKETCH) $(call find_files,S|c|cpp,$(SKETCH_DIR)))
-endif
-
-IGNORE_PATTERN := $(foreach dir,$(EXCLUDE_DIRS),$(dir)/%)
-USER_INC := $(filter-out $(IGNORE_PATTERN),$(call find_files,h,$(SKETCH_DIR) $(dir $(LIBS))))
-USER_SRC := $(SKETCH) $(filter-out $(IGNORE_PATTERN),$(call find_files,S|c|cpp, $(LIBS)))
-# Object file suffix seems to be significant for the linker...
-USER_OBJ := $(subst .ino,_.cpp,$(patsubst %,$(BUILD_DIR)/%$(OBJ_EXT),$(notdir $(USER_SRC))))
-USER_DIRS := $(sort $(dir $(USER_SRC)))
-USER_INC_DIRS := $(sort $(dir $(USER_INC)))
-
-# Use first flash definition for the board as default
-FLASH_DEF_MATCH = $(if $(filter $(CHIP), esp32),build\.flash_size=(\S+),menu\.FlashSize\.([^\.]+)=(.+))
-FLASH_DEF ?= $(shell cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) {if (/^$(BOARD)\.$(FLASH_DEF_MATCH)/){ print "$$1"; exit;}}')
-# Same method for LwIPVariant
-LWIP_VARIANT ?= $(shell cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) {if (/^$(BOARD)\.menu\.LwIPVariant\.([^\.=]+)=/){ print "$$1"; exit;}}')
-
-# Handle possible changed state i.e. make command line parameters or changed git versions
-CMD_LINE := $(shell ps $$PPID -o command | tail -1)
-IGNORE_STATE ?= $(if $(filter $(MAKECMDGOALS), help clean dump_flash restore_flash list_boards),1,)
-ifeq ($(IGNORE_STATE),)
- STATE_LOG := $(BUILD_DIR)/state.txt
- STATE_INF := $(strip $(foreach par,$(CMD_LINE),$(if $(findstring =,$(par)),$(par),))) \
- $(XTENSA_VERSION) $(ESP_ARDUINO_VERSION)
- PREV_STATE_INF := $(if $(wildcard $(STATE_LOG)),$(shell cat $(STATE_LOG)),$(STATE_INF))
- ifneq ($(PREV_STATE_INF),$(STATE_INF))
- $(info * Build state has changed, doing a full rebuild *)
- $(shell rm -rf $(BUILD_DIR)/*)
- endif
- STATE_SAVE := $(shell mkdir -p $(BUILD_DIR) ; echo '$(STATE_INF)' >$(STATE_LOG))
-endif
-
-# The actual build commands are to be extracted from the Arduino description files
-ARDUINO_DESC := $(shell find $(ESP_ROOT) -maxdepth 1 -name "*.txt" | sort)
-$(ARDUINO_MK): $(ARDUINO_DESC) $(MAKEFILE_LIST) | $(BUILD_DIR)
- perl -e "$$PARSE_ARDUINO" $(BOARD) '$(FLASH_DEF)' '$(OS)' '$(LWIP_VARIANT)' $(ARDUINO_EXTRA_DESC) $(ARDUINO_DESC) >$(ARDUINO_MK)
-
--include $(ARDUINO_MK)
-
-# Compilation directories and path
-INCLUDE_DIRS += $(CORE_DIR) $(ESP_ROOT)/variants/$(INCLUDE_VARIANT) $(BUILD_DIR)
-C_INCLUDES := $(foreach dir,$(INCLUDE_DIRS) $(USER_INC_DIRS),-I$(dir))
-VPATH += $(shell find $(CORE_DIR) -type d) $(USER_DIRS)
-
-# Automatically generated build information data
-# Makes the build date and git descriptions at the actual build event available as string constants in the program
-BUILD_INFO_H = $(BUILD_DIR)/buildinfo.h
-BUILD_INFO_CPP = $(BUILD_DIR)/buildinfo.c++
-BUILD_INFO_OBJ = $(BUILD_INFO_CPP)$(OBJ_EXT)
-
-$(BUILD_INFO_H): | $(BUILD_DIR)
- echo "typedef struct { const char *date, *time, *src_version, *env_version;} _tBuildInfo; extern _tBuildInfo _BuildInfo;" >$@
-
-# Build rules for the different source file types
-$(BUILD_DIR)/%.cpp$(OBJ_EXT): %.cpp $(BUILD_INFO_H) $(ARDUINO_MK)
- echo $(<F)
- $(CPP_COM) $(CPP_EXTRA) $< -o $@
-
-$(BUILD_DIR)/%_.cpp$(OBJ_EXT): %.ino $(BUILD_INFO_H) $(ARDUINO_MK)
- echo $(<F)
- $(CPP_COM) $(CPP_EXTRA) -x c++ -include $(CORE_DIR)/Arduino.h $< -o $@
-
-$(BUILD_DIR)/%.c$(OBJ_EXT): %.c $(ARDUINO_MK)
- echo $(<F)
- $(C_COM) $(C_EXTRA) $< -o $@
-
-$(BUILD_DIR)/%.S$(OBJ_EXT): %.S $(ARDUINO_MK)
- echo $(<F)
- $(S_COM) $(S_EXTRA) $< -o $@
-
-$(CORE_LIB): $(CORE_OBJ)
- echo Creating core archive
- rm -f $@
- $(AR_COM) $^
-
-BUILD_DATE = $(call time_string,"%Y-%m-%d")
-BUILD_TIME = $(call time_string,"%H:%M:%S")
-
-$(MAIN_EXE): $(CORE_LIB) $(USER_OBJ)
- echo Linking $(MAIN_EXE)
- $(LINK_PREBUILD)
- echo " Versions: $(XTENSA_VERSION), $(ESP_ARDUINO_VERSION)"
- echo '#include <buildinfo.h>' >$(BUILD_INFO_CPP)
- echo '_tBuildInfo _BuildInfo = {"$(BUILD_DATE)","$(BUILD_TIME)","$(XTENSA_VERSION)","$(ESP_ARDUINO_VERSION)"};' >>$(BUILD_INFO_CPP)
- $(CPP_COM) $(BUILD_INFO_CPP) -o $(BUILD_INFO_OBJ)
- $(LD_COM) $(LD_EXTRA)
- $(GEN_PART_COM)
- $(ELF2BIN_COM)
- $(SIZE_COM) | perl -e "$$MEM_USAGE" "$(MEM_FLASH)" "$(MEM_RAM)"
-ifneq ($(LWIP_INFO),)
- printf "LwIPVariant: $(LWIP_INFO)\n"
-endif
-ifneq ($(FLASH_INFO),)
- printf "Flash size: $(FLASH_INFO)\n\n"
-endif
- perl -e 'print "Build complete. Elapsed time: ", time()-$(START_TIME), " seconds\n\n"'
-
-upload flash: all
- $(UPLOAD_COM)
-
-ota: all
- $(OTA_TOOL) -r -i $(ESP_ADDR) -p $(ESP_PORT) -a $(ESP_PWD) -f $(MAIN_EXE)
-
-http: all
- $(HTTP_TOOL) --verbose -F image=@$(MAIN_EXE) --user $(HTTP_USR):$(HTTP_PWD) http://$(HTTP_ADDR)$(HTTP_URI)
- echo "\n"
-
-$(FS_IMAGE): $(ARDUINO_MK) $(wildcard $(FS_DIR)/*)
- echo Generating filesystem image: $(FS_IMAGE)
- $(MKSPIFFS_COM)
-
-fs: $(FS_IMAGE)
-
-upload_fs flash_fs: $(FS_IMAGE)
- $(FS_UPLOAD_COM)
-
-ota_fs: $(FS_IMAGE)
- $(OTA_TOOL) -r -i $(ESP_ADDR) -p $(ESP_PORT) -a $(ESP_PWD) -s -f $(FS_IMAGE)
-
-run: flash
- python -m serial.tools.miniterm --rts=0 --dtr=0 $(UPLOAD_PORT) 115200
-
-FLASH_FILE ?= $(BUILD_DIR)/esp_flash.bin
-dump_flash:
- echo Dumping flash memory to file: $(FLASH_FILE)
- $(ESPTOOL_PATTERN) --before no_reset --after soft_reset read_flash 0 $(shell perl -e 'shift =~ /(\d+)([MK])/ || die "Invalid memory size\n";$$mem_size=$$1*1024;$$mem_size*=1024 if $$2 eq "M";print $$mem_size;' $(FLASH_DEF)) $(FLASH_FILE)
-
-dump_fs:
- echo Dumping flash file system to directory: $(FS_REST_DIR)
- -$(ESPTOOL_PATTERN) --before no_reset --after soft_reset read_flash $(SPIFFS_START) $(SPIFFS_SIZE) $(FS_IMAGE)
- mkdir -p $(FS_REST_DIR)
- echo
- echo == Files ==
- $(RESTSPIFFS_COM)
-
-restore_flash:
- echo Restoring flash memory from file: $(FLASH_FILE)
- $(ESPTOOL_PATTERN) --before no_reset --after soft_reset -a soft_reset write_flash 0 $(FLASH_FILE)
-
-erase_flash:
- $(ESPTOOL_PATTERN) --before no_reset --after soft_reset erase_flash
-
-clean:
- echo Removing all build files
- rm -rf $(BUILD_DIR)/* $(FILES_TO_CLEAN)
-
-list_boards:
- echo === Available boards ===
- cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) { if (/^(\w+)\.name=(.+)/){ print sprintf("%-20s %s\n", $$1,$$2);} }'
-
-list_lib:
- echo === User specific libraries ===
- perl -e 'foreach (@ARGV) {print "$$_\n"}' "* Include directories:" $(USER_INC_DIRS) "* Library source files:" $(USER_SRC)
-
-list_flash_defs:
- echo === Memory configurations for board: $(BOARD) ===
- cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) { if (/^$(BOARD)\.$(FLASH_DEF_MATCH)/){ print sprintf("%-10s %s\n", $$1,$$2);} }'
-
-help:
- echo
- echo "Generic makefile for building Arduino esp8266 and esp32 projects"
- echo "This file can either be used directly or included from another makefile"
- echo ""
- echo "The following targets are available:"
- echo " all (default) Build the project application"
- echo " clean Remove all intermediate build files"
- echo " flash Build and and flash the project application"
- echo " flash_fs Build and and flash file system (when applicable)"
- echo " ota Build and and flash via OTA"
- echo " Params: ESP_ADDR, ESP_PORT and ESP_PWD"
- echo " ota_fs Build and and flash file system via OTA"
- echo " http Build and and flash via http (curl)"
- echo " Params: HTTP_ADDR, HTTP_URI, HTTP_PWD and HTTP_USR"
- echo " dump_flash Dump the whole board flash memory to a file"
- echo " restore_flash Restore flash memory from a previously dumped file"
- echo " dump_fs Extract all files from the flash file system"
- echo " Params: FS_DUMP_DIR"
- echo " erase_flash Erase the whole flash"
- echo " list_lib Show a list of used library files and include paths"
- echo "Configurable parameters:"
- echo " SKETCH Main source file"
- echo " If not specified the first sketch in current"
- echo " directory will be used."
- echo " LIBS Includes in the sketch file of libraries from within"
- echo " the ESP Arduino directories are automatically"
- echo " detected. If this is not enough, define this"
- echo " variable with all libraries or directories needed."
- echo " CHIP Set to esp8266 or esp32. Default: '$(CHIP)'"
- echo " BOARD Name of the target board. Default: '$(BOARD)'"
- echo " Use 'list_boards' to get list of available ones"
- echo " FLASH_DEF Flash partitioning info. Default '$(FLASH_DEF)'"
- echo " Use 'list_flash_defs' to get list of available ones"
- echo " BUILD_DIR Directory for intermediate build files."
- echo " Default '$(BUILD_DIR)'"
- echo " BUILD_EXTRA_FLAGS Additional parameters for the compilation commands"
- echo " FS_DIR File system root directory"
- echo " UPLOAD_PORT Serial flashing port name. Default: '$(UPLOAD_PORT)'"
- echo " UPLOAD_SPEED Serial flashing baud rate. Default: '$(UPLOAD_SPEED)'"
- echo " FLASH_FILE File name for dump and restore flash operations"
- echo " Default: '$(FLASH_FILE)'"
- echo " LWIP_VARIANT Use specified variant of the lwip library when applicable"
- echo " Default: $(LWIP_VARIANT) ($(LWIP_INFO))"
- echo " VERBOSE Set to 1 to get full printout of the build"
- echo " SINGLE_THREAD Use only one build thread"
- echo
-
-$(BUILD_DIR):
- mkdir -p $(BUILD_DIR)
-
-.PHONY: all
-all: $(BUILD_DIR) $(ARDUINO_MK) $(BUILD_INFO_H) prebuild $(MAIN_EXE)
-
-prebuild:
-ifdef USE_PREBUILD
- $(CORE_PREBUILD)
-endif
- $(SKETCH_PREBUILD)
-
-# Include all available dependencies
--include $(wildcard $(BUILD_DIR)/*$(DEP_EXT))
-
-.DEFAULT_GOAL = all
-
-ifndef SINGLE_THREAD
- # Use multithreaded builds by default
- MAKEFLAGS += -j
-endif
-
-ifndef VERBOSE
- # Set silent mode as default
- MAKEFLAGS += --silent
-endif
-
-# Inline Perl scripts
-
-# Parse Arduino definitions and build commands from the descriptions
-define PARSE_ARDUINO
-my $$board = shift;
-my $$flashSize = shift;
-my $$os = (shift =~ /Windows_NT/) ? "windows" : "linux";
-my $$lwipvariant = shift;
-my %v;
-
-sub def_var {
- my ($$name, $$var) = @_;
- print "$$var ?= $$v{$$name}\n";
- $$v{$$name} = "\$$($$var)";
-}
-
-$$v{'runtime.platform.path'} = '$$(ESP_ROOT)';
-$$v{'includes'} = '$$(C_INCLUDES)';
-$$v{'runtime.ide.version'} = '10605';
-$$v{'build.arch'} = uc('$(CHIP)');
-$$v{'build.project_name'} = '$$(MAIN_NAME)';
-$$v{'build.path'} = '$$(BUILD_DIR)';
-$$v{'object_files'} = '$$^ $$(BUILD_INFO_OBJ)';
-
-foreach my $$fn (@ARGV) {
- open($$f, $$fn) || die "Failed to open: $$fn\n";
- while (<$$f>) {
- s/\s+$$//;
- next unless /^(\w[\w\-\.]+)=(.*)/;
- my ($$key, $$val) =($$1, $$2);
- $$board_defined = 1 if $$key eq "$$board.name";
- $$key =~ s/$$board\.menu\.FlashSize\.$$flashSize\.//;
- $$key =~ s/$$board\.menu\.CpuFrequency\.[^\.]+\.//;
- $$key =~ s/$$board\.menu\.FlashFreq\.[^\.]+\.//;
- $$key =~ s/$$board\.menu\.UploadSpeed\.[^\.]+\.//;
- $$key =~ s/$$board\.menu\.ResetMethod\.[^\.]+\.//;
- $$key =~ s/$$board\.menu\.FlashMode\.[^\.]+\.//;
- $$key =~ s/$$board\.menu\.LwIPVariant\.$$lwipvariant\.//;
- $$key =~ s/^$$board\.//;
- $$v{$$key} ||= $$val;
- $$v{$$1} = $$v{$$key} if $$key =~ /(.+)\.$$os$$/;
- }
- close($$f);
-}
-$$v{'runtime.tools.xtensa-lx106-elf-gcc.path'} ||= '$$(COMP_PATH)';
-$$v{'runtime.tools.esptool.path'} ||= '$$(ESPTOOL_PATH)';
-
-die "* Unkown board $$board\n" unless $$board_defined;
-print "# Board definitions\n";
-def_var('build.code_debug', 'CORE_DEBUG_LEVEL');
-def_var('build.f_cpu', 'F_CPU');
-def_var('build.flash_mode', 'FLASH_MODE');
-def_var('build.flash_freq', 'FLASH_SPEED');
-def_var('upload.resetmethod', 'UPLOAD_RESET');
-def_var('upload.speed', 'UPLOAD_SPEED');
-def_var('compiler.warning_flags', 'COMP_WARNINGS');
-$$v{'upload.verbose'} = '$$(UPLOAD_VERB)';
-$$v{'serial.port'} = '$$(UPLOAD_PORT)';
-$$v{'recipe.objcopy.hex.pattern'} =~ s/[^"]+\/bootloaders\/eboot\/eboot.elf/\$$(BOOT_LOADER)/;
-$$v{'recipe.hooks.linking.prelink.1.pattern'} =~ s/\{build.vtable_flags\}/\$$(VTABLE_FLAGS)/;
-$$v{'tools.esptool.upload.pattern'} =~ s/\{(cmd|path)\}/\{tools.esptool.$$1\}/g;
-$$v{'compiler.cpreprocessor.flags'} .= " \$$(C_PRE_PROC_FLAGS)";
-$$v{'build.extra_flags'} .= " \$$(BUILD_EXTRA_FLAGS)";
-
-foreach my $$key (sort keys %v) {
- while ($$v{$$key} =~/\{/) {
- $$v{$$key} =~ s/\{([\w\-\.]+)\}/$$v{$$1}/;
- $$v{$$key} =~ s/""//;
- }
- $$v{$$key} =~ s/ -o\s+$$//;
- $$v{$$key} =~ s/(-D\w+=)"([^"]+)"/$$1\\"$$2\\"/g;
-}
-
-print "INCLUDE_VARIANT = $$v{'build.variant'}\n";
-print "# Commands\n";
-print "C_COM=$$v{'recipe.c.o.pattern'}\n";
-print "CPP_COM=$$v{'recipe.cpp.o.pattern'}\n";
-print "S_COM=$$v{'recipe.S.o.pattern'}\n";
-print "AR_COM=$$v{'recipe.ar.pattern'}\n";
-print "LD_COM=$$v{'recipe.c.combine.pattern'}\n";
-print "PART_FILE?=$$1\n" if $$v{'recipe.objcopy.eep.pattern'} =~ /\"([^\"]+\.csv)\"/;
-$$v{'recipe.objcopy.eep.pattern'} =~ s/\"([^\"]+\.csv)\"/\$$(PART_FILE)/;
-print "GEN_PART_COM=$$v{'recipe.objcopy.eep.pattern'}\n";
-print "ELF2BIN_COM=$$v{'recipe.objcopy.hex.pattern'}\n";
-print "SIZE_COM=$$v{'recipe.size.pattern'}\n";
-print "ESPTOOL_COM?=$$v{'tools.esptool.path'}/$$v{'tools.esptool.cmd'}\n";
-print "UPLOAD_COM?=$$v{'tools.esptool.upload.pattern'}\n";
-
-if ($$v{'build.spiffs_start'}) {
- print "SPIFFS_START?=$$v{'build.spiffs_start'}\n";
- my $$spiffs_size = sprintf("0x%X", hex($$v{'build.spiffs_end'})-hex($$v{'build.spiffs_start'}));
- print "SPIFFS_SIZE?=$$spiffs_size\n";
-} elsif ($$v{'build.partitions'}) {
- print "COMMA=,\n";
- print "SPIFFS_SPEC:=\$$(subst \$$(COMMA), ,\$$(shell grep spiffs \$$(PART_FILE)))\n";
- print "SPIFFS_START:=\$$(word 4,\$$(SPIFFS_SPEC))\n";
- print "SPIFFS_SIZE:=\$$(word 5,\$$(SPIFFS_SPEC))\n";
-}
-$$v{'build.spiffs_blocksize'} ||= "4096";
-print "SPIFFS_BLOCK_SIZE?=$$v{'build.spiffs_blocksize'}\n";
-print "MKSPIFFS_COM?=\"\$$(MKSPIFFS_PATH)\" -b \$$(SPIFFS_BLOCK_SIZE) -s \$$(SPIFFS_SIZE) -c \$$(FS_DIR) \$$(FS_IMAGE)\n";
-print "RESTSPIFFS_COM?=\"\$$(MKSPIFFS_PATH)\" -b \$$(SPIFFS_BLOCK_SIZE) -s \$$(SPIFFS_SIZE) -u \$$(FS_REST_DIR) \$$(FS_IMAGE)\n";
-
-my $$fs_upload_com = $$v{'tools.esptool.upload.pattern'};
-$$fs_upload_com =~ s/(.+ -ca) .+/$$1 \$$(SPIFFS_START) -cf \$$(FS_IMAGE)/;
-$$fs_upload_com =~ s/(.+ --flash_size detect) .+/$$1 \$$(SPIFFS_START) \$$(FS_IMAGE)/;
-print "FS_UPLOAD_COM?=$$fs_upload_com\n";
-my $$val = $$v{'recipe.hooks.core.prebuild.1.pattern'};
-$$val =~ s/bash -c "(.+)"/$$1/;
-$$val =~ s/(#define .+0x)(\`)/"\\$$1\"$$2/;
-$$val =~ s/(\\)//;
-print "CORE_PREBUILD=$$val\n";
-print "SKETCH_PREBUILD=$$v{'recipe.hooks.sketch.prebuild.1.pattern'}\n";
-print "VTABLE_FLAGS?=$$v{'build.vtable_flags'}\n";
-print "LINK_PREBUILD=$$v{'recipe.hooks.linking.prelink.1.pattern'}\n";
-print "MEM_FLASH=$$v{'recipe.size.regex'}\n";
-print "MEM_RAM=$$v{'recipe.size.regex.data'}\n";
-print "FLASH_INFO=$$v{'menu.FlashSize.' . $$flashSize}\n";
-print "LWIP_INFO=$$v{'menu.LwIPVariant.' . $$lwipvariant}\n";
-endef
-export PARSE_ARDUINO
-
-# Convert memory information
-define MEM_USAGE
-$$fp = shift;
-$$rp = shift;
-while (<>) {
- $$r += $$1 if /$$rp/;
- $$f += $$1 if /$$fp/;
-}
-print "\nMemory usage\n";
-print sprintf(" %-6s %6d bytes\n" x 2 ."\n", "Ram:", $$r, "Flash:", $$f);
-endef
-export MEM_USAGE