commit c4295aa38feab553697a0766ee2aea18fed540e1 from: Base Pr1me via: GitHub date: Wed Sep 26 21:53:18 2018 UTC Delete makeEspArduino.mk commit - 307d022e30a0d0797da4fe392e69172cba12e890 commit + c4295aa38feab553697a0766ee2aea18fed540e1 blob - 0facd1e7a225ba09f1207f2633ea6c1c5c73ada3 (mode 644) blob + /dev/null --- makeEspArduino.mk +++ /dev/null @@ -1,516 +0,0 @@ -#==================================================================================== -# makeESPArduino -# -# A makefile for ESP8286 and ESP32 Arduino projects. -# Edit the contents of this file to suit your project -# or just include it and override the applicable macros. -# -# License: LGPL 2.1 -# General and full license information is available at: -# https://github.com/plerup/makeEspArduino -# -# Copyright (c) 2016-2017 Peter Lerup. All rights reserved. -# -# -# Changed to run on OpenBSD -# -#==================================================================================== - -#==================================================================================== -# Project specfic values -#==================================================================================== - -# Include possible project makefile. This can be used to override the defaults below --include $(firstword $(PROJ_CONF) $(dir $(SKETCH))config.mk) - -#=== Default values not available in the Arduino configuration files - -PREFIX = /usr/local/share - -CHIP ?= esp8266 -ESP_ROOT ?= $(PREFIX)/espressif/$(CHIP) - -# Set chip specific default board unless specified -BOARD ?= $(if $(filter $(CHIP), esp32),esp32,generic) - -# Serial flashing parameters -UPLOAD_PORT ?= /dev/ttyU0 -UPLOAD_VERB ?= -v - -# Output directory -BUILD_ROOT ?= /tmp/mkESP -BUILD_DIR ?= $(BUILD_ROOT)/$(MAIN_NAME)_$(BOARD) - -# File system source directory -FS_DIR ?= $(dir $(SKETCH))data -FS_REST_DIR ?= $(BUILD_DIR)/file_system - -# Bootloader -BOOT_LOADER ?= $(ESP_ROOT)/bootloaders/eboot/eboot.elf - -# LIB locations -ARDUINO_ROOT = $(PREFIX)/arduino -ARDUINO_LIBS = ${ARDUINO_ROOT}/libraries -LOCAL_LIBS = ./ -CUSTOM_LIBS = /home/basepr1me/Arduino/libraries -ESP_LIBS = $(ESP_ROOT)/libraries - -# ESP Arduino directories -MKSPIFFS_PATH := $(lastword $(wildcard $(ESP_ROOT)/tools/mkspiffs/*)) -SDK_ROOT = $(ESP_ROOT)/tools/sdk -TOOLS_ROOT = $(ESP_ROOT)/tools - -# OTA parameters -ESP_ADDR ?= ESP_123456 -ESP_PORT ?= 8266 -ESP_PWD ?= 123 - -# HTTP update parameters -HTTP_ADDR ?= ESP_123456 -HTTP_URI ?= /update -HTTP_PWD ?= user -HTTP_USR ?= password - -#==================================================================================== -# Standard build logic and values -#==================================================================================== - -START_TIME := $(shell perl -e "print time();") -OS ?= $(shell uname -s) - -# Utility functions -time_string = $(shell date +$(1)) -find_files = $(shell find $2 | awk '/.*\.($1)/') - - -ifeq ($(wildcard $(ESP_ROOT)/cores/$(CHIP)),) - $(error $(ESP_ROOT) is not a vaild directory for $(CHIP)) -endif - -ESPTOOL ?= $(shell which esptool.py 2>/dev/null || which esptool 2>/dev/null) -ifneq ($(ESPTOOL),) - # esptool exists in path, overide defaults and use it for esp8266 flash operations - ifeq ($(CHIP),esp8266) - ESPTOOL_COM = $(ESPTOOL) - UPLOAD_COM = $(ESPTOOL_PATTERN) --before no_reset --after soft_reset write_flash 0x00000 $(BUILD_DIR)/$(MAIN_NAME).bin - FS_UPLOAD_COM = $(ESPTOOL_PATTERN) --before no_reset --after soft_reset write_flash $(SPIFFS_START) $(FS_IMAGE) - endif -endif -ESPTOOL_PATTERN = echo Using: $(UPLOAD_PORT) @ $(UPLOAD_SPEED) && "$(ESPTOOL_COM)" --baud=$(UPLOAD_SPEED) --port $(UPLOAD_PORT) --chip $(CHIP) - -ifeq ($(MAKECMDGOALS),help) - DEMO=1 -endif -ifdef DEMO - SKETCH := $(if $(filter $(CHIP), esp32),$(ESP_LIBS)/WiFi/examples/WiFiScan/WiFiScan.ino,$(ESP_LIBS)/ESP8266WebServer/examples/HelloServer/HelloServer.ino) -endif -SKETCH ?= $(wildcard *.ino) -ifeq ($(SKETCH),) - $(error No sketch specified or found. Use "DEMO=1" for testing) -endif -ifeq ($(wildcard $(SKETCH)),) - $(error Sketch $(SKETCH) not found) -endif -ESP_ARDUINO_VERSION = $(shell pkg_info | grep arduino-$(CHIP) | cut -d' ' -f1) -ifeq ($(CHIP),esp8266) - XTENSA = lx106 -else - XTENSA = esp32 -endif -XTENSA_VERSION := $(shell pkg_info | grep xtensa-$(XTENSA)-elf | cut -d' ' -f1) - -# Main output definitions -MAIN_NAME := $(basename $(notdir $(SKETCH))) -MAIN_EXE = $(BUILD_DIR)/$(MAIN_NAME).bin -FS_IMAGE = $(BUILD_DIR)/FS.spiffs - -# Build file extensions -OBJ_EXT = .o -DEP_EXT = .d - -# Auto generated makefile with Arduino definitions -ARDUINO_MK = $(BUILD_DIR)/arduino.mk - -# Special tool definitions -OTA_TOOL ?= $(TOOLS_ROOT)/espota.py -HTTP_TOOL ?= curl - -# Core source files -CORE_DIR = $(ESP_ROOT)/cores/$(CHIP) -CORE_SRC := $(call find_files,S|c|cpp,$(CORE_DIR)) -CORE_OBJ := $(patsubst %,$(BUILD_DIR)/%$(OBJ_EXT),$(notdir $(CORE_SRC))) -CORE_LIB = $(BUILD_DIR)/arduino.ar - -SKETCH_DIR = $(dir $(SKETCH)) - -# User defined compilation units and directories -ifeq ($(LIBS),) - # Automatically find directories with header files used by the sketch - LIBS := $(shell perl -e 'use File::Find;@d = split(" ", shift);while (<>) {$$f{"$$1"} = 1 if /^\s*\#include\s+[<"]([^>"]+)/;}find(sub {if ($$f{$$_}){print $$File::Find::dir," ";$$f{$$_}=0;}}, @d);' \ - "$(CUSTOM_LIBS) $(LOCAL_LIBS) $(ESP_LIBS) $(ARDUINO_LIBS)" $(SKETCH) $(call find_files,S|c|cpp,$(SKETCH_DIR))) -endif - -IGNORE_PATTERN := $(foreach dir,$(EXCLUDE_DIRS),$(dir)/%) -USER_INC := $(filter-out $(IGNORE_PATTERN),$(call find_files,h,$(SKETCH_DIR) $(dir $(LIBS)))) -USER_SRC := $(SKETCH) $(filter-out $(IGNORE_PATTERN),$(call find_files,S|c|cpp, $(LIBS))) -# Object file suffix seems to be significant for the linker... -USER_OBJ := $(subst .ino,_.cpp,$(patsubst %,$(BUILD_DIR)/%$(OBJ_EXT),$(notdir $(USER_SRC)))) -USER_DIRS := $(sort $(dir $(USER_SRC))) -USER_INC_DIRS := $(sort $(dir $(USER_INC))) - -# Use first flash definition for the board as default -FLASH_DEF_MATCH = $(if $(filter $(CHIP), esp32),build\.flash_size=(\S+),menu\.FlashSize\.([^\.]+)=(.+)) -FLASH_DEF ?= $(shell cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) {if (/^$(BOARD)\.$(FLASH_DEF_MATCH)/){ print "$$1"; exit;}}') -# Same method for LwIPVariant -LWIP_VARIANT ?= $(shell cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) {if (/^$(BOARD)\.menu\.LwIPVariant\.([^\.=]+)=/){ print "$$1"; exit;}}') - -# Handle possible changed state i.e. make command line parameters or changed git versions -CMD_LINE := $(shell ps $$PPID -o command | tail -1) -IGNORE_STATE ?= $(if $(filter $(MAKECMDGOALS), help clean dump_flash restore_flash list_boards),1,) -ifeq ($(IGNORE_STATE),) - STATE_LOG := $(BUILD_DIR)/state.txt - STATE_INF := $(strip $(foreach par,$(CMD_LINE),$(if $(findstring =,$(par)),$(par),))) \ - $(XTENSA_VERSION) $(ESP_ARDUINO_VERSION) - PREV_STATE_INF := $(if $(wildcard $(STATE_LOG)),$(shell cat $(STATE_LOG)),$(STATE_INF)) - ifneq ($(PREV_STATE_INF),$(STATE_INF)) - $(info * Build state has changed, doing a full rebuild *) - $(shell rm -rf $(BUILD_DIR)/*) - endif - STATE_SAVE := $(shell mkdir -p $(BUILD_DIR) ; echo '$(STATE_INF)' >$(STATE_LOG)) -endif - -# The actual build commands are to be extracted from the Arduino description files -ARDUINO_DESC := $(shell find $(ESP_ROOT) -maxdepth 1 -name "*.txt" | sort) -$(ARDUINO_MK): $(ARDUINO_DESC) $(MAKEFILE_LIST) | $(BUILD_DIR) - perl -e "$$PARSE_ARDUINO" $(BOARD) '$(FLASH_DEF)' '$(OS)' '$(LWIP_VARIANT)' $(ARDUINO_EXTRA_DESC) $(ARDUINO_DESC) >$(ARDUINO_MK) - --include $(ARDUINO_MK) - -# Compilation directories and path -INCLUDE_DIRS += $(CORE_DIR) $(ESP_ROOT)/variants/$(INCLUDE_VARIANT) $(BUILD_DIR) -C_INCLUDES := $(foreach dir,$(INCLUDE_DIRS) $(USER_INC_DIRS),-I$(dir)) -VPATH += $(shell find $(CORE_DIR) -type d) $(USER_DIRS) - -# Automatically generated build information data -# Makes the build date and git descriptions at the actual build event available as string constants in the program -BUILD_INFO_H = $(BUILD_DIR)/buildinfo.h -BUILD_INFO_CPP = $(BUILD_DIR)/buildinfo.c++ -BUILD_INFO_OBJ = $(BUILD_INFO_CPP)$(OBJ_EXT) - -$(BUILD_INFO_H): | $(BUILD_DIR) - echo "typedef struct { const char *date, *time, *src_version, *env_version;} _tBuildInfo; extern _tBuildInfo _BuildInfo;" >$@ - -# Build rules for the different source file types -$(BUILD_DIR)/%.cpp$(OBJ_EXT): %.cpp $(BUILD_INFO_H) $(ARDUINO_MK) - echo $(' >$(BUILD_INFO_CPP) - echo '_tBuildInfo _BuildInfo = {"$(BUILD_DATE)","$(BUILD_TIME)","$(XTENSA_VERSION)","$(ESP_ARDUINO_VERSION)"};' >>$(BUILD_INFO_CPP) - $(CPP_COM) $(BUILD_INFO_CPP) -o $(BUILD_INFO_OBJ) - $(LD_COM) $(LD_EXTRA) - $(GEN_PART_COM) - $(ELF2BIN_COM) - $(SIZE_COM) | perl -e "$$MEM_USAGE" "$(MEM_FLASH)" "$(MEM_RAM)" -ifneq ($(LWIP_INFO),) - printf "LwIPVariant: $(LWIP_INFO)\n" -endif -ifneq ($(FLASH_INFO),) - printf "Flash size: $(FLASH_INFO)\n\n" -endif - perl -e 'print "Build complete. Elapsed time: ", time()-$(START_TIME), " seconds\n\n"' - -upload flash: all - $(UPLOAD_COM) - -ota: all - $(OTA_TOOL) -r -i $(ESP_ADDR) -p $(ESP_PORT) -a $(ESP_PWD) -f $(MAIN_EXE) - -http: all - $(HTTP_TOOL) --verbose -F image=@$(MAIN_EXE) --user $(HTTP_USR):$(HTTP_PWD) http://$(HTTP_ADDR)$(HTTP_URI) - echo "\n" - -$(FS_IMAGE): $(ARDUINO_MK) $(wildcard $(FS_DIR)/*) - echo Generating filesystem image: $(FS_IMAGE) - $(MKSPIFFS_COM) - -fs: $(FS_IMAGE) - -upload_fs flash_fs: $(FS_IMAGE) - $(FS_UPLOAD_COM) - -ota_fs: $(FS_IMAGE) - $(OTA_TOOL) -r -i $(ESP_ADDR) -p $(ESP_PORT) -a $(ESP_PWD) -s -f $(FS_IMAGE) - -run: flash - python -m serial.tools.miniterm --rts=0 --dtr=0 $(UPLOAD_PORT) 115200 - -FLASH_FILE ?= $(BUILD_DIR)/esp_flash.bin -dump_flash: - echo Dumping flash memory to file: $(FLASH_FILE) - $(ESPTOOL_PATTERN) --before no_reset --after soft_reset read_flash 0 $(shell perl -e 'shift =~ /(\d+)([MK])/ || die "Invalid memory size\n";$$mem_size=$$1*1024;$$mem_size*=1024 if $$2 eq "M";print $$mem_size;' $(FLASH_DEF)) $(FLASH_FILE) - -dump_fs: - echo Dumping flash file system to directory: $(FS_REST_DIR) - -$(ESPTOOL_PATTERN) --before no_reset --after soft_reset read_flash $(SPIFFS_START) $(SPIFFS_SIZE) $(FS_IMAGE) - mkdir -p $(FS_REST_DIR) - echo - echo == Files == - $(RESTSPIFFS_COM) - -restore_flash: - echo Restoring flash memory from file: $(FLASH_FILE) - $(ESPTOOL_PATTERN) --before no_reset --after soft_reset -a soft_reset write_flash 0 $(FLASH_FILE) - -erase_flash: - $(ESPTOOL_PATTERN) --before no_reset --after soft_reset erase_flash - -clean: - echo Removing all build files - rm -rf $(BUILD_DIR)/* $(FILES_TO_CLEAN) - -list_boards: - echo === Available boards === - cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) { if (/^(\w+)\.name=(.+)/){ print sprintf("%-20s %s\n", $$1,$$2);} }' - -list_lib: - echo === User specific libraries === - perl -e 'foreach (@ARGV) {print "$$_\n"}' "* Include directories:" $(USER_INC_DIRS) "* Library source files:" $(USER_SRC) - -list_flash_defs: - echo === Memory configurations for board: $(BOARD) === - cat $(ESP_ROOT)/boards.txt | perl -e 'while (<>) { if (/^$(BOARD)\.$(FLASH_DEF_MATCH)/){ print sprintf("%-10s %s\n", $$1,$$2);} }' - -help: - echo - echo "Generic makefile for building Arduino esp8266 and esp32 projects" - echo "This file can either be used directly or included from another makefile" - echo "" - echo "The following targets are available:" - echo " all (default) Build the project application" - echo " clean Remove all intermediate build files" - echo " flash Build and and flash the project application" - echo " flash_fs Build and and flash file system (when applicable)" - echo " ota Build and and flash via OTA" - echo " Params: ESP_ADDR, ESP_PORT and ESP_PWD" - echo " ota_fs Build and and flash file system via OTA" - echo " http Build and and flash via http (curl)" - echo " Params: HTTP_ADDR, HTTP_URI, HTTP_PWD and HTTP_USR" - echo " dump_flash Dump the whole board flash memory to a file" - echo " restore_flash Restore flash memory from a previously dumped file" - echo " dump_fs Extract all files from the flash file system" - echo " Params: FS_DUMP_DIR" - echo " erase_flash Erase the whole flash" - echo " list_lib Show a list of used library files and include paths" - echo "Configurable parameters:" - echo " SKETCH Main source file" - echo " If not specified the first sketch in current" - echo " directory will be used." - echo " LIBS Includes in the sketch file of libraries from within" - echo " the ESP Arduino directories are automatically" - echo " detected. If this is not enough, define this" - echo " variable with all libraries or directories needed." - echo " CHIP Set to esp8266 or esp32. Default: '$(CHIP)'" - echo " BOARD Name of the target board. Default: '$(BOARD)'" - echo " Use 'list_boards' to get list of available ones" - echo " FLASH_DEF Flash partitioning info. Default '$(FLASH_DEF)'" - echo " Use 'list_flash_defs' to get list of available ones" - echo " BUILD_DIR Directory for intermediate build files." - echo " Default '$(BUILD_DIR)'" - echo " BUILD_EXTRA_FLAGS Additional parameters for the compilation commands" - echo " FS_DIR File system root directory" - echo " UPLOAD_PORT Serial flashing port name. Default: '$(UPLOAD_PORT)'" - echo " UPLOAD_SPEED Serial flashing baud rate. Default: '$(UPLOAD_SPEED)'" - echo " FLASH_FILE File name for dump and restore flash operations" - echo " Default: '$(FLASH_FILE)'" - echo " LWIP_VARIANT Use specified variant of the lwip library when applicable" - echo " Default: $(LWIP_VARIANT) ($(LWIP_INFO))" - echo " VERBOSE Set to 1 to get full printout of the build" - echo " SINGLE_THREAD Use only one build thread" - echo - -$(BUILD_DIR): - mkdir -p $(BUILD_DIR) - -.PHONY: all -all: $(BUILD_DIR) $(ARDUINO_MK) $(BUILD_INFO_H) prebuild $(MAIN_EXE) - -prebuild: -ifdef USE_PREBUILD - $(CORE_PREBUILD) -endif - $(SKETCH_PREBUILD) - -# Include all available dependencies --include $(wildcard $(BUILD_DIR)/*$(DEP_EXT)) - -.DEFAULT_GOAL = all - -ifndef SINGLE_THREAD - # Use multithreaded builds by default - MAKEFLAGS += -j -endif - -ifndef VERBOSE - # Set silent mode as default - MAKEFLAGS += --silent -endif - -# Inline Perl scripts - -# Parse Arduino definitions and build commands from the descriptions -define PARSE_ARDUINO -my $$board = shift; -my $$flashSize = shift; -my $$os = (shift =~ /Windows_NT/) ? "windows" : "linux"; -my $$lwipvariant = shift; -my %v; - -sub def_var { - my ($$name, $$var) = @_; - print "$$var ?= $$v{$$name}\n"; - $$v{$$name} = "\$$($$var)"; -} - -$$v{'runtime.platform.path'} = '$$(ESP_ROOT)'; -$$v{'includes'} = '$$(C_INCLUDES)'; -$$v{'runtime.ide.version'} = '10605'; -$$v{'build.arch'} = uc('$(CHIP)'); -$$v{'build.project_name'} = '$$(MAIN_NAME)'; -$$v{'build.path'} = '$$(BUILD_DIR)'; -$$v{'object_files'} = '$$^ $$(BUILD_INFO_OBJ)'; - -foreach my $$fn (@ARGV) { - open($$f, $$fn) || die "Failed to open: $$fn\n"; - while (<$$f>) { - s/\s+$$//; - next unless /^(\w[\w\-\.]+)=(.*)/; - my ($$key, $$val) =($$1, $$2); - $$board_defined = 1 if $$key eq "$$board.name"; - $$key =~ s/$$board\.menu\.FlashSize\.$$flashSize\.//; - $$key =~ s/$$board\.menu\.CpuFrequency\.[^\.]+\.//; - $$key =~ s/$$board\.menu\.FlashFreq\.[^\.]+\.//; - $$key =~ s/$$board\.menu\.UploadSpeed\.[^\.]+\.//; - $$key =~ s/$$board\.menu\.ResetMethod\.[^\.]+\.//; - $$key =~ s/$$board\.menu\.FlashMode\.[^\.]+\.//; - $$key =~ s/$$board\.menu\.LwIPVariant\.$$lwipvariant\.//; - $$key =~ s/^$$board\.//; - $$v{$$key} ||= $$val; - $$v{$$1} = $$v{$$key} if $$key =~ /(.+)\.$$os$$/; - } - close($$f); -} -$$v{'runtime.tools.xtensa-lx106-elf-gcc.path'} ||= '$$(COMP_PATH)'; -$$v{'runtime.tools.esptool.path'} ||= '$$(ESPTOOL_PATH)'; - -die "* Unkown board $$board\n" unless $$board_defined; -print "# Board definitions\n"; -def_var('build.code_debug', 'CORE_DEBUG_LEVEL'); -def_var('build.f_cpu', 'F_CPU'); -def_var('build.flash_mode', 'FLASH_MODE'); -def_var('build.flash_freq', 'FLASH_SPEED'); -def_var('upload.resetmethod', 'UPLOAD_RESET'); -def_var('upload.speed', 'UPLOAD_SPEED'); -def_var('compiler.warning_flags', 'COMP_WARNINGS'); -$$v{'upload.verbose'} = '$$(UPLOAD_VERB)'; -$$v{'serial.port'} = '$$(UPLOAD_PORT)'; -$$v{'recipe.objcopy.hex.pattern'} =~ s/[^"]+\/bootloaders\/eboot\/eboot.elf/\$$(BOOT_LOADER)/; -$$v{'recipe.hooks.linking.prelink.1.pattern'} =~ s/\{build.vtable_flags\}/\$$(VTABLE_FLAGS)/; -$$v{'tools.esptool.upload.pattern'} =~ s/\{(cmd|path)\}/\{tools.esptool.$$1\}/g; -$$v{'compiler.cpreprocessor.flags'} .= " \$$(C_PRE_PROC_FLAGS)"; -$$v{'build.extra_flags'} .= " \$$(BUILD_EXTRA_FLAGS)"; - -foreach my $$key (sort keys %v) { - while ($$v{$$key} =~/\{/) { - $$v{$$key} =~ s/\{([\w\-\.]+)\}/$$v{$$1}/; - $$v{$$key} =~ s/""//; - } - $$v{$$key} =~ s/ -o\s+$$//; - $$v{$$key} =~ s/(-D\w+=)"([^"]+)"/$$1\\"$$2\\"/g; -} - -print "INCLUDE_VARIANT = $$v{'build.variant'}\n"; -print "# Commands\n"; -print "C_COM=$$v{'recipe.c.o.pattern'}\n"; -print "CPP_COM=$$v{'recipe.cpp.o.pattern'}\n"; -print "S_COM=$$v{'recipe.S.o.pattern'}\n"; -print "AR_COM=$$v{'recipe.ar.pattern'}\n"; -print "LD_COM=$$v{'recipe.c.combine.pattern'}\n"; -print "PART_FILE?=$$1\n" if $$v{'recipe.objcopy.eep.pattern'} =~ /\"([^\"]+\.csv)\"/; -$$v{'recipe.objcopy.eep.pattern'} =~ s/\"([^\"]+\.csv)\"/\$$(PART_FILE)/; -print "GEN_PART_COM=$$v{'recipe.objcopy.eep.pattern'}\n"; -print "ELF2BIN_COM=$$v{'recipe.objcopy.hex.pattern'}\n"; -print "SIZE_COM=$$v{'recipe.size.pattern'}\n"; -print "ESPTOOL_COM?=$$v{'tools.esptool.path'}/$$v{'tools.esptool.cmd'}\n"; -print "UPLOAD_COM?=$$v{'tools.esptool.upload.pattern'}\n"; - -if ($$v{'build.spiffs_start'}) { - print "SPIFFS_START?=$$v{'build.spiffs_start'}\n"; - my $$spiffs_size = sprintf("0x%X", hex($$v{'build.spiffs_end'})-hex($$v{'build.spiffs_start'})); - print "SPIFFS_SIZE?=$$spiffs_size\n"; -} elsif ($$v{'build.partitions'}) { - print "COMMA=,\n"; - print "SPIFFS_SPEC:=\$$(subst \$$(COMMA), ,\$$(shell grep spiffs \$$(PART_FILE)))\n"; - print "SPIFFS_START:=\$$(word 4,\$$(SPIFFS_SPEC))\n"; - print "SPIFFS_SIZE:=\$$(word 5,\$$(SPIFFS_SPEC))\n"; -} -$$v{'build.spiffs_blocksize'} ||= "4096"; -print "SPIFFS_BLOCK_SIZE?=$$v{'build.spiffs_blocksize'}\n"; -print "MKSPIFFS_COM?=\"\$$(MKSPIFFS_PATH)\" -b \$$(SPIFFS_BLOCK_SIZE) -s \$$(SPIFFS_SIZE) -c \$$(FS_DIR) \$$(FS_IMAGE)\n"; -print "RESTSPIFFS_COM?=\"\$$(MKSPIFFS_PATH)\" -b \$$(SPIFFS_BLOCK_SIZE) -s \$$(SPIFFS_SIZE) -u \$$(FS_REST_DIR) \$$(FS_IMAGE)\n"; - -my $$fs_upload_com = $$v{'tools.esptool.upload.pattern'}; -$$fs_upload_com =~ s/(.+ -ca) .+/$$1 \$$(SPIFFS_START) -cf \$$(FS_IMAGE)/; -$$fs_upload_com =~ s/(.+ --flash_size detect) .+/$$1 \$$(SPIFFS_START) \$$(FS_IMAGE)/; -print "FS_UPLOAD_COM?=$$fs_upload_com\n"; -my $$val = $$v{'recipe.hooks.core.prebuild.1.pattern'}; -$$val =~ s/bash -c "(.+)"/$$1/; -$$val =~ s/(#define .+0x)(\`)/"\\$$1\"$$2/; -$$val =~ s/(\\)//; -print "CORE_PREBUILD=$$val\n"; -print "SKETCH_PREBUILD=$$v{'recipe.hooks.sketch.prebuild.1.pattern'}\n"; -print "VTABLE_FLAGS?=$$v{'build.vtable_flags'}\n"; -print "LINK_PREBUILD=$$v{'recipe.hooks.linking.prelink.1.pattern'}\n"; -print "MEM_FLASH=$$v{'recipe.size.regex'}\n"; -print "MEM_RAM=$$v{'recipe.size.regex.data'}\n"; -print "FLASH_INFO=$$v{'menu.FlashSize.' . $$flashSize}\n"; -print "LWIP_INFO=$$v{'menu.LwIPVariant.' . $$lwipvariant}\n"; -endef -export PARSE_ARDUINO - -# Convert memory information -define MEM_USAGE -$$fp = shift; -$$rp = shift; -while (<>) { - $$r += $$1 if /$$rp/; - $$f += $$1 if /$$fp/; -} -print "\nMemory usage\n"; -print sprintf(" %-6s %6d bytes\n" x 2 ."\n", "Ram:", $$r, "Flash:", $$f); -endef -export MEM_USAGE