commit - 9ee638217e550d924d15c8e37b815fe4942a4790
commit + 7ce1d67d3d94ef5f37a59a14afa0515ed0839a51
blob - 376a2d6b272501fb285f519f8b3e4868601ba857
blob + bf7b5ba821f6d00d7e42d0a500bbcc9fe686386f
--- README.md
+++ README.md
# ESP8266_Repeater
-Simple AP WiFi<-->Serial repeater.
+Version 1.00 June 2017
+Just a simple AP for WiFi<-->Serial repeater
+Not as restrictive as ESP-AT firmware
+
+Perhaps, I'll turn this in to more of a router later down the road,
+with module registration and direct packet writing.
blob - /dev/null
blob + 137d97ad7975889d5b27bf75c4b7cad5f6cf6d8d (mode 644)
--- /dev/null
+++ ESP8266_Repeater.ino
+/* ESP8266_Repeater.ino
+ *
+ * Version 1.00 June 2017
+ * Just a simple AP for WiFi<-->Serial repeater
+ * Not as restrictive as ESP-AT firmware
+ *
+ * Perhaps, I'll turn this in to more of a router later down the road,
+ * with module registration and direct packet writing.
+ */
+
+#include <ESP8266WiFi.h>
+
+#define MAX_CLIENTS 20
+#define PORT 8080
+
+#define IP 10,0,50,1
+#define SUBNET 255,255,255,0
+
+const char *ssid = "XXXX";
+const char *password = "XXXX";
+
+uint8_t clcount = 0;
+
+IPAddress local_ip(IP);
+IPAddress local_subnet(SUBNET);
+IPAddress local_gateway(IP);
+
+WiFiServer myserver(PORT);
+WiFiClient myserver_clients[MAX_CLIENTS];
+
+extern "C" {
+ #include "user_interface.h"
+ #include "espconn.h"
+}
+
+void setup() {
+ // setup serial
+ Serial.begin(115200);
+ Serial.println();
+ Serial.setDebugOutput(true);
+
+ // setup AP
+ delay(1000);
+ espconn_tcp_set_max_con(MAX_CLIENTS);
+ WiFi.mode(WIFI_AP);
+ WiFi.softAPConfig(local_ip, local_gateway, local_subnet);
+ WiFi.softAP(ssid, password);
+ IPAddress my_ip = WiFi.softAPIP();
+
+ // start server
+ myserver.begin();
+ myserver.setNoDelay(true);
+}
+
+void loop() {
+
+ // check for clients
+
+ if (myserver.hasClient()) {
+ for (clcount = 0; clcount < MAX_CLIENTS; clcount++) {
+ if (!myserver_clients[clcount] || !myserver_clients[clcount].connected()) {
+ if (myserver_clients[clcount])
+ myserver_clients[clcount].stop();
+ myserver_clients[clcount] = myserver.available();
+ continue;
+ }
+ }
+
+ // reject client
+
+ WiFiClient myserver_reject = myserver.available();
+ myserver_reject.stop();
+ }
+
+ // check for client data
+
+ for (clcount = 0; clcount < MAX_CLIENTS; clcount++) {
+ if (myserver_clients[clcount] && myserver_clients[clcount].connected()) {
+ if(myserver_clients[clcount].available()) {
+ // write to serial
+ while(myserver_clients[clcount].available()) Serial.write(myserver_clients[clcount].read());
+ }
+ }
+ }
+
+ // check for serial data and write to clients
+
+ if(Serial.available()){
+ size_t len = Serial.available();
+ uint8_t sbuf[len];
+ Serial.readBytes(sbuf, len);
+
+ // write to all clients
+
+ for (clcount = 0; clcount < MAX_CLIENTS; clcount++){
+ if (myserver_clients[clcount] && myserver_clients[clcount].connected()) {
+ myserver_clients[clcount].write(sbuf, len);
+ delay(1);
+ }
+ }
+ }
+}