Commit Diff


commit - 26605ab9097d73c1f0927852daef14fcb28209f7
commit + 1d606547d37dfe5cd3efd894322719fcdcb8aae3
blob - 749bacd7c68d021690d5e47cd05957f6f0493f53 (mode 644)
blob + /dev/null
--- Club_Rabbit.ino	
+++ /dev/null	
@@ -1,518 +0,0 @@
-/*
- * Copyright (c) 2021, 2022 Tracey Emery K7TLE
-*
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-/*
- * Watch the order of pins on the board!
- *
- * D14 - Red LED	Power/AR			#Solid/cw
- * D12 - Green LED	Transmitting Voice/cw/Off	#Solid/Blink/Off
- * D13 - Blue LED	Transmitting			#On during transmit
- *
- * D5  - Transmit optical relay
- * D18 - Transmitter POWER relay
- * D25 - Audio out
- * D33 - Audio in
- * D26 - Morse out
- *
- * # If we have enough memory leftover
- * CLUB/R OFF		# Power Transmitter Off
- * CLUB/R ON		# Power Transmitter On
- * CLUB/R START		# Start Transmitting Audio
- * CLUB/R STOP		# Stop Transmitting Audio
- */
-#include <soc/soc.h>
-#include <soc/rtc_cntl_reg.h>
-
-#include <WiFi.h>
-#include <AsyncTCP.h>
-#include <ESPAsyncWebServer.h>
-#include <XT_DAC_Audio.h>
-#include <Morse.h>
-
-#include "audio_call.h"
-#include "html.h"
-
-#define DEBUG		 0
-#define TIMER		 0	/* save some power */
-
-#define MAX_CLIENTS	 8
-
-#define RED_LED		 14
-#define	GREEN_LED	 12
-#define BLUE_LED	 13
-
-#define TRANSMIT	 5
-#define TRANSMIT_PWR	 18	/* LOW - OFF, HIGH - ON (switch LOW - ON) */
-/* #define OPTIONAL	 21 */
-#define TRANSMIT_DELAY	 10	/* seconds */
-#define TRANSMIT_MIN	 10	/* seconds */
-#define TRANSMIT_MAX	 30	/* seconds */
-
-#define ONE_SECOND	 1000
-
-#define MORSE_OUT	 26
-#define AUDIO_OUT	 25
-#define AUDIO_IN	 33
-
-#define DPRINTF(x,y)	 do { if (DEBUG) { Serial.println(x); \
-			    Serial2.println(x); sleep(y); }} while(0)
-
-#define WPM		 15
-
-/* Morse */
-Morse			 morse_led(M_GPIO, RED_LED, WPM);
-Morse			 morse_dac(M_DAC, MORSE_OUT, WPM);
-
-String			 led_morse = "`ar`";
-String			 dac_morse = "de the clubcall rabbit";
-
-/* my_ssid will be used for the web interface header */
-const char		*my_ssid = "Club Rabbit 1";
-const char		*my_pass = "Pass1234";
-IPAddress		 my_ip(192, 168, 5, 1);
-IPAddress		 my_gw(192, 168, 5, 1);
-IPAddress		 my_net(255, 255, 255, 0);
-
-AsyncWebServer		 server(80);
-AsyncEventSource	 events("/event");
-
-XT_Wav_Class		 Sound(audio);
-XT_DAC_Audio_Class	 DacAudio(AUDIO_OUT, 0);
-
-void			 setup(void);
-void			 loop(void);
-void			 set_green(void);
-void			 set_red(void);
-void			 handle_transmission(void);
-
-String			 handle_connect(const String&);
-
-unsigned long		 transmit_start_millis, green_start_millis;
-unsigned long		 tx_current_millis, countdown_timer_millis;
-unsigned long		 countdown_millis, red_start_millis;
-
-int			 transmit_now = 0; /* don't delay first */
-int			 hunting = 0, playing = 0, play = 0, voice = 1;
-int			 transmit_end = 0, powered = 1, rand_num = 1, cw = 1;
-int			 send_handle_events = 0, transmit_new, alt_cw = 1;
-
-uint8_t channel =	 3;
-
-void
-setup()
-{
-	/* disable brownout for startup */
-	WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);
-	delay(1000);
-
-	/* immediate pin setup, transmitter shouldn't be on */
-	pinMode(TRANSMIT, OUTPUT);
-	pinMode(TRANSMIT_PWR, OUTPUT);
-	digitalWrite(TRANSMIT, LOW);
-	digitalWrite(TRANSMIT_PWR, LOW);
-
-#ifdef DEBUG
-	/* setup serial */
-	Serial.begin(115200);
-	Serial2.begin(115200);
-	sleep(1);
-#endif
-
-	DPRINTF("", 1);
-	DPRINTF("Setup serial", 0);
-	DPRINTF("Setup transmitter", 0);
-
-	/* setup LEDs */
-	pinMode(RED_LED, OUTPUT);
-	pinMode(GREEN_LED, OUTPUT);
-	pinMode(BLUE_LED, OUTPUT);
-	digitalWrite(RED_LED, LOW);
-	digitalWrite(GREEN_LED, LOW);
-	digitalWrite(BLUE_LED, LOW);
-	DPRINTF("Setup LEDs", 0);
-
-	/* audio setup */
-	pinMode(AUDIO_OUT, OUTPUT);
-	pinMode(AUDIO_IN, INPUT);
-	DPRINTF("Setup audio", 0);
-	/* DacAudio.DacVolume = 35; */
-
-	/* setup our AP */
-	/*
-	 * Had to disable these in sdkconfig.h and use simple WiFi to keep
-	 * Android 10 connected. What a PIA
-	 *
-	 * #define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED 0
-	 * #define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED 0
-	 */
-
-	/* WiFi.mode(WIFI_AP); */
-	/* WiFi.softAP(my_ssid, my_pass); */
-
-	WiFi.mode(WIFI_AP);
-	WiFi.softAPConfig(my_ip, my_gw, my_net);
-	WiFi.setTxPower(WIFI_POWER_19_5dBm);
-	WiFi.softAP(my_ssid, my_pass, channel, false, MAX_CLIENTS);
-
-	DPRINTF("Setup AP", 0);
-
-	/* setup our web server */
-	server.on("/", HTTP_GET, [](AsyncWebServerRequest *request) {
-		request->send_P(200, "text/html", index_html, handle_connect);
-	});
-	server.on("/update", HTTP_GET, [](AsyncWebServerRequest *request) {
-		String input_message;
-
-		if (request->hasParam("hunting") && powered) {
-			DPRINTF("Hunting toggled", 0);
-			input_message = request->getParam("hunting")->value();
-			hunting = input_message.toInt();
-			transmit_start_millis = tx_current_millis;
-			if (hunting)
-				digitalWrite(GREEN_LED, HIGH);
-			else {
-				morse_led.gpio_tx_stop();
-				morse_dac.dac_tx_stop();
-				digitalWrite(GREEN_LED, LOW);
-			}
-			countdown_millis = millis();
-		}
-		if (request->hasParam("power")) {
-			DPRINTF("Power toggled", 0);
-			input_message = request->getParam("power")->value();
-			powered = input_message.toInt();
-			if (!powered) {
-				morse_led.gpio_tx_stop();
-				morse_dac.dac_tx_stop();
-				digitalWrite(RED_LED, LOW);
-				digitalWrite(GREEN_LED, LOW);
-			} else {
-				digitalWrite(RED_LED, HIGH);
-				digitalWrite(GREEN_LED, LOW);
-			}
-
-		}
-		if (request->hasParam("delay")) {
-			DPRINTF("Delay changed", 0);
-			input_message = request->getParam("delay")->value();
-			if (input_message.toInt() >= TRANSMIT_MIN &&
-			    input_message.toInt() <= TRANSMIT_MAX)
-				transmit_new = input_message.toInt();
-		}
-		if (request->hasParam("rand")) {
-			DPRINTF("Random delay toggled", 0);
-			input_message = request->getParam("rand")->value();
-			rand_num = input_message.toInt();
-		}
-		if (request->hasParam("altcw")) {
-			DPRINTF("Random cw toggled", 0);
-			input_message = request->getParam("altcw")->value();
-			alt_cw = input_message.toInt();
-		}
-		if (request->hasParam("cw")) {
-			digitalWrite(GREEN_LED, HIGH);
-			DPRINTF("CW toggled", 0);
-			input_message = request->getParam("cw")->value();
-			cw = input_message.toInt();
-		}
-		if (request->hasParam("trans_now")) {
-			DPRINTF("PTT pressed", 0);
-			input_message = request->getParam("trans_now")->value();
-			transmit_now = 0;
-		}
-
-		request->send_P(200, "text/plain", "OK");
-	});
-	server.addHandler(&events);
-	server.begin();
-	DPRINTF("Setup web server", 0);
-
-	/* turning on the tranmitter is the final step */
-	digitalWrite(TRANSMIT_PWR, HIGH);
-	digitalWrite(RED_LED, HIGH);
-	DPRINTF("", 0);
-	DPRINTF("Transmitter powered on", 1);
-	DPRINTF("", 0);
-	DPRINTF("The rabbit is ready to run!", 0);
-	DPRINTF("", 0);
-
-	/* setup millis timers */
-	transmit_start_millis = millis();
-	green_start_millis = millis();
-	red_start_millis = millis();
-
-	/* re-enable brownout */
-	delay(1000);
-	WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 1);
-}
-
-void
-loop()
-{
-	tx_current_millis = millis();
-
-	if (cw)
-		playing = morse_dac.dac_transmitting();
-	else
-		playing = Sound.Playing;
-
-	handle_transmission();
-
-	if (hunting && powered)
-		set_green();
-
-	if (!powered) {
-		set_red();
-		digitalWrite(TRANSMIT_PWR, LOW);
-	}
-
-	if (powered)
-		digitalWrite(TRANSMIT_PWR, HIGH);
-}
-
-void
-handle_transmission(void)
-{
-	if (hunting && !play && !playing && transmit_now > 0 && powered &&
-	    tx_current_millis - countdown_timer_millis >= ONE_SECOND &&
-	    TIMER) {
-		events.send(String((transmit_now - (millis() -
-		    countdown_millis)) / 1000).c_str(), "count", millis());
-		countdown_timer_millis = tx_current_millis;
-	}
-
-	if (cw)
-		morse_dac.dac_watchdog();
-	else
-		DacAudio.FillBuffer();
-
-	if (hunting && !play && !playing && powered &&
-	    (tx_current_millis - transmit_start_millis >= transmit_now)) {
-		digitalWrite(BLUE_LED, HIGH);
-		digitalWrite(TRANSMIT, HIGH);
-		DPRINTF("Transmitting", 0);
-		transmit_start_millis = tx_current_millis;
-		events.send("disable", "tnbutton", millis());
-		events.send("disable", "cwbox", millis());
-		events.send("disable", "altcwbox", millis());
-		if (TIMER)
-			events.send("TX", "count", millis());
-		if (rand_num) {
-			transmit_now = random(TRANSMIT_MIN,
-			    TRANSMIT_MAX) * ONE_SECOND;
-			events.send(String(transmit_now / ONE_SECOND).c_str(),
-			    "rand", millis());
-		} else {
-			/* setup our transmit delay now */
-			if (transmit_new)
-				transmit_now = transmit_new * ONE_SECOND;
-			else
-				transmit_now = TRANSMIT_DELAY * ONE_SECOND;
-			events.send(String(transmit_now / ONE_SECOND).c_str(),
-			    "rand", millis());
-		}
-		play = 1;
-	}
-
-	if (hunting && play && !playing && !cw) {
-		if (tx_current_millis - transmit_start_millis >= ONE_SECOND) {
-			DPRINTF("Play audio", 0);
-			DacAudio.Play(&Sound);
-			play = 0;
-			transmit_end = 1;
-		}
-	} else if (hunting && play && !playing && cw) {
-		if (tx_current_millis - transmit_start_millis >= ONE_SECOND) {
-			DPRINTF("Send CW", 0);
-			morse_dac.dac_tx(dac_morse);
-			play = 0;
-			transmit_end = 1;
-		}
-	}
-
-	if (transmit_end && playing) {
-		transmit_start_millis = tx_current_millis;
-		countdown_timer_millis = tx_current_millis;
-		countdown_millis = tx_current_millis;
-		transmit_end = 2;
-	}
-
-	if (!playing && transmit_end == 2) {
-		if (tx_current_millis - transmit_start_millis >= ONE_SECOND) {
-			events.send("enable", "tnbutton", millis());
-			events.send("enable", "altcwbox", millis());
-			if (!alt_cw)
-				events.send("enable", "cwbox", millis());
-			else
-				cw = !cw;
-			DPRINTF("End transmission", 0);
-			DPRINTF("", 0);
-			digitalWrite(BLUE_LED, LOW);
-			digitalWrite(TRANSMIT, LOW);
-			transmit_start_millis = tx_current_millis;
-			playing = 0;
-			transmit_end = 0;
-		}
-	}
-}
-
-String
-handle_connect(const String& var)
-{
-	int power = digitalRead(TRANSMIT_PWR);
-
-	String button1 = "<button id=\"time_b\" onclick=\"set_time()\"";
-	if (rand_num)
-		button1 += " disabled";
-	button1 += ">Update Transmission Delay</button>";
-
-	String button2 = "<button id=\"start\" onclick=\"start_hunt(this)\"";
-	if (hunting || !power)
-		button2 += " disabled";
-	button2 += ">Start Hunt</button>";
-
-	String button3 = "<button id=\"stop\" onclick=\"stop_hunt(this)\"";
-	if (!hunting || !power)
-		button3 += " disabled";
-	button3 += ">Stop Hunt</button>";
-
-	String button4 = "<button id=\"on\" onclick=\"power_on(this)\"";
-	if (power)
-		button4 += " disabled";
-	button4 += ">Power On Radio</button>";
-
-	String button5 = "<button id=\"off\" onclick=\"power_off(this)\"";
-	if (!power)
-		button5 += " disabled";
-	button5 += ">Power Off Radio</button>";
-
-	String button6 = "<button id=\"trans_now\" onclick=\"trans_now(this)\"";
-	if (!hunting || !power)
-		button6 += " disabled";
-	button6 += ">Transmit Now</button>";
-
-	String box1 = "<input id=\"randbox\" type=\"checkbox\"";
-	if (rand_num)
-		box1 += " checked";
-	box1 += " onchange=\"toggle_random(this)\" />";
-
-	String box2 = "<input id=\"cwbox\" type=\"checkbox\"";
-	if (cw)
-		box2 += " checked";
-	if (alt_cw)
-		box2 += " disabled";
-	box2 += " onchange=\"toggle_cw(this)\" />";
-
-	String box3 = "<input id=\"altcwbox\" type=\"checkbox\"";
-	if (alt_cw)
-		box3 += " checked";
-	box3 += " onchange=\"toggle_alt_cw(this)\" />";
-
-	if (var == "HUNTING") {
-		if (hunting)
-			return "Hunt is on";
-		else
-			return "Hunt is off";
-	}
-	if (var == "POWER") {
-		if (digitalRead(TRANSMIT_PWR))
-			return "Powered On";
-		else {
-			transmit_now = 0;
-			return "Powered Off";
-		}
-	}
-	if (var == "BUTTON1")
-		return button1;
-	if (var == "BUTTON2")
-		return button2;
-	if (var == "BUTTON3")
-		return button3;
-	if (var == "BUTTON4")
-		return button4;
-	if (var == "BUTTON5")
-		return button5;
-	if (var == "BUTTON6")
-		return button6;
-	if (var == "DELAY") {
-		if (transmit_now)
-			return String(transmit_now / ONE_SECOND);
-		else if (transmit_new)
-			return String(transmit_new);
-		else
-			return String(TRANSMIT_DELAY);
-	}
-	if (var == "TRANSMIT_MIN")
-		return String(TRANSMIT_MIN);
-	if (var == "TRANSMIT_MAX")
-		return String(TRANSMIT_MAX);
-	if (var == "SSID")
-		return String(my_ssid);
-	if (var == "RANDSTAT") {
-		if (rand_num)
-			return "On";
-		else
-			return "Off";
-	}
-	if (var == "RANDBOX")
-		return box1;
-	if (var == "ALTCWSTAT") {
-		if (alt_cw)
-			return "On";
-		else
-			return "Off";
-	}
-	if (var == "ALTCWBOX")
-		return box3;
-	if (var == "CWSTAT") {
-		if (cw)
-			return "Yes";
-		else
-			return "No";
-	}
-	if (var == "CWBOX")
-		return box2;
-	if (var == "TX") {
-		if (TIMER)
-			return "---";
-		else
-			return "TX OFF";
-	}
-
-	return String();
-}
-
-void
-set_green(void)
-{
-	if (cw && tx_current_millis - green_start_millis >= ONE_SECOND) {
-		digitalWrite(GREEN_LED, !digitalRead(GREEN_LED));
-		green_start_millis = millis();
-	}
-}
-
-void
-set_red(void)
-{
-	morse_led.gpio_watchdog();
-	if (morse_led.gpio_transmitting())
-		red_start_millis = millis();
-
-	if (!morse_led.gpio_transmitting() && tx_current_millis -
-	    red_start_millis >= ONE_SECOND * 2) {
-		morse_led.gpio_tx(led_morse);
-	}
-}
blob - a086b609c6d88d12495a40d2eb4bc595900e6610 (mode 644)
blob + /dev/null
--- LICENSE	
+++ /dev/null	
@@ -1,25 +0,0 @@
-BSD 2-Clause License
-
-Copyright (c) 2021, Tracey Emery K7TLE
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice, this
-   list of conditions and the following disclaimer.
-
-2. Redistributions in binary form must reproduce the above copyright notice,
-   this list of conditions and the following disclaimer in the documentation
-   and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
blob - 951f46cd60f0109de17a48dd4cf17feecc87b04d (mode 644)
blob + /dev/null
--- README.md	
+++ /dev/null	
@@ -1,33 +0,0 @@
-# Club_Rabbit
-ESP32 software for building a Foxhunt rabbit.
-
-# Library Requirements
-XT_DAC_Audio: https://www.xtronical.com/the-dacaudio-library-download-and-installation/
-
-Morse: https://github.com/basepr1me/Morse
-
-AsyncTCP: https://github.com/me-no-dev/AsyncTCP
-
-ESPAsyncWebServer: https://github.com/me-no-dev/ESPAsyncWebServer
-
-# audio_call.h information
-A file called audio_call.h is required for this to run. Obviously, I'm not going
-to upload my club's audio file, because it is only legal for club members to
-use it.
-
-To create your own file, the following website has the information you need: https://circuitdigest.com/microcontroller-projects/esp32-based-audio-player
-
-However, I modified XT_DAC_Audio and the audio_call.h instructions to place the
-large file in PROGMEM. The author of the blog states that the ESP32 memory space
-is small, but that's not true. They simply aren't putting the audio in the right
-chunks. Constify the WavData and set audio in audio_call.h to:
-
-const unsigned char audio[######] PROGMEM
-
-I'm not certain the XT_DAC_Audio writer knows this either.
-
-# WIP
-This shouldn't be used by anybody yet. It is still highly experimental and
-subject to large changes.
-
-This style is OpenBSD style and may not look right in the Arduino IDE, since I don't use it.
blob - 334ff826b9dbb247a7f5b330edca705ef32fd20a (mode 644)
blob + /dev/null
Binary files club_rabbit.pdf and /dev/null differ
blob - 456bd6262d1a19c6c5f7108f88b58b5e0a3200d3 (mode 644)
blob + /dev/null
--- html.h	
+++ /dev/null	
@@ -1,302 +0,0 @@
-/*
- * Copyright (c) 2021, 2022 Tracey Emery K7TLE
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-const char index_html[] PROGMEM = R"rawliteral(
-<!doctype html><html>
-<head>
-	<meta name="viewport" content="width=device-width, initial-scale=1">
-	<style>
-		html {
-			font-family:Helvetica;
-			display: inline-block;
-			margin: 0px auto;
-			text-align: center;
-		}
-		p {
-			font-size: 1.2rem;
-		}
-		body {
-			margin: 0;
-		}
-		.topbar {
-			overflow: hidden;
-			background-color: #000077;
-			color: white;
-			font-size: 1rem;
-		}
-		.content {
-			padding: 20px;
-		}
-		.card {
-			background-color: white;
-			box-shadow: 2px 2px 12px 1px rgba(140,140,140,.5);
-		}
-		.cards {
-			max-width: 300px;
-			margin: 0 auto;
-			display: grid;
-			grid-gap: 2rem;
-			grid-template-columns: repeat(auto-fit,
-			    minmax(200px, 1fr));
-		}
-	        .status {
-			font-size: 1.4rem;
-		}
-		button {
-			border: 1px solid #0066cc;
-			background-color: #0099cc;
-			color: #ffffff;
-			padding: 5px 10px;
-		}
-		button:hover {
-			border: 1px solid #0099cc;
-			background-color: #00aacc;
-			color: #ffffff;
-			padding: 5px 10px;
-		}
-		button:onpress {
-			border: 1px solid #0099cc;
-			background-color: #ff0000;
-			color: #ffffff;
-			padding: 5px 10px;
-		}
-		button:disabled,
-		button[disabled] {
-			border: 1px solid #999999;
-			background-color: #cccccc;
-			color: #666666;
-		}
-	</style>
-	<script>
-		var xhr;
-
-		if (!!window.EventSource) {
-			var source = new EventSource("/event");
-			source.addEventListener("rand", function (e) {
-				document.getElementById("delay").innerHTML = e.data;
-			}, false);
-			source.addEventListener("count", function (e) {
-				document.getElementById("transmit").innerHTML = e.data;
-			}, false);
-			source.addEventListener("tnbutton", function (e) {
-				if (e.data == "enable")
-					document.getElementById("trans_now").removeAttribute("disabled");
-				else if (e.data == "disable")
-					document.getElementById("trans_now").setAttribute("disabled", "disabled");
-			}, false);
-			source.addEventListener("altcwbox", function (e) {
-				if (e.data == "enable")
-					document.getElementById("altcwbox").removeAttribute("disabled");
-				else if (e.data == "disable")
-					document.getElementById("altcwbox").setAttribute("disabled", "disabled");
-			}, false);
-			source.addEventListener("cwbox", function (e) {
-				if (e.data == "enable")
-					document.getElementById("cwbox").removeAttribute("disabled");
-				else if (e.data == "disable")
-					document.getElementById("cwbox").setAttribute("disabled", "disabled");
-			}, false);
-		}
-
-		function start_hunt(element) {
-			xhr = new XMLHttpRequest();
-			xhr.open("GET", "/update?hunting=1", false);
-			xhr.send();
-			element.setAttribute("disabled", "disabled");
-			document.getElementById("stop").removeAttribute("disabled");
-			document.getElementById("hunting").innerHTML = "Hunt is on";
-			document.getElementById("trans_now").removeAttribute("disabled");
-		}
-
-		function stop_hunt(element) {
-			xhr = new XMLHttpRequest();
-			xhr.open("GET", "/update?hunting=0", false);
-			xhr.send();
-			element.setAttribute("disabled" ,"disabled");
-			document.getElementById("start").removeAttribute("disabled");
-			document.getElementById("hunting").innerHTML = "Hunt is off";
-			document.getElementById("transmit").innerHTML = "---";
-			document.getElementById("trans_now").setAttribute("disabled", "disabled");
-		}
-
-		function power_on(element) {
-			xhr = new XMLHttpRequest();
-			xhr.open("GET", "/update?power=1", false);
-			xhr.send();
-			element.setAttribute("disabled", "disabled");
-			document.getElementById("off").removeAttribute("disabled");
-			document.getElementById("power").innerHTML = "Powered on";
-			document.getElementById("start").removeAttribute("disabled");
-		}
-
-		function power_off(element) {
-			xhr = new XMLHttpRequest();
-			xhr.open("GET", "/update?power=0&hunting=0", false);
-			xhr.send();
-			element.setAttribute("disabled", "disabled");
-			document.getElementById("on").removeAttribute("disabled");
-			document.getElementById("power").innerHTML = "Powered off";
-			document.getElementById("start").setAttribute("disabled", "disabled");
-			document.getElementById("stop").setAttribute("disabled", "disabled");
-			document.getElementById("hunting").innerHTML = "Hunt is off";
-			document.getElementById("transmit").innerHTML = "---";
-			document.getElementById("trans_now").setAttribute("disabled", "disabled");
-		}
-
-		function set_time() {
-			var delay_t = parseInt(document.getElementById("time").value);
-			if (isNaN(delay_t)) {
-				alert("That is not a number!");
-				document.getElementById("time").value = "";
-			} else if (delay_t < %TRANSMIT_MIN% || delay_t > %TRANSMIT_MAX%) {
-				alert("Number not within allotted range (" +
-				    %TRANSMIT_MIN% + "-" + %TRANSMIT_MAX% + ")");
-			} else {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?delay=" + delay_t);
-				xhr.send();
-				document.getElementById("delay").innerHTML = delay_t;
-			}
-		}
-
-		function trans_now(element) {
-			xhr = new XMLHttpRequest();
-			xhr.open("GET", "/update?trans_now=1", false);
-			xhr.send();
-			element.setAttribute("disabled", "disabled");
-		}
-
-		function toggle_random(element) {
-			if (element.checked) {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?rand=1", false);
-				xhr.send();
-				document.getElementById("rand").innerHTML = "On";
-				document.getElementById("time").setAttribute("disabled", "disabled");
-				document.getElementById("time_b").setAttribute("disabled", "disabled");
-			} else {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?rand=0", false);
-				xhr.send();
-				document.getElementById("rand").innerHTML = "Off";
-				document.getElementById("time").removeAttribute("disabled");
-				document.getElementById("time_b").removeAttribute("disabled");
-			}
-		}
-
-		function toggle_alt_cw(element) {
-			var cwc = 0;
-			if (document.getElementById("cwbox").checked)
-				cwc = 1;
-			if (element.checked) {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?altcw=1&cw="+cwc, false);
-				xhr.send();
-				document.getElementById("alt_cw").innerHTML = "On";
-				document.getElementById("cwbox").setAttribute("disabled", "disabled");
-				document.getElementById("cwbox").setAttribute("disabled", "disabled");
-			} else {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?altcw=0&cw="+cwc, false);
-				xhr.send();
-				document.getElementById("alt_cw").innerHTML = "Off";
-				document.getElementById("cwbox").removeAttribute("disabled");
-				document.getElementById("cwbox").removeAttribute("disabled");
-			}
-		}
-
-		function toggle_cw(element) {
-			if (element.checked) {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?cw=1", false);
-				xhr.send();
-				document.getElementById("cw").innerHTML = "Yes";
-			} else {
-				xhr = new XMLHttpRequest();
-				xhr.open("GET", "/update?cw=0", false);
-				xhr.send();
-				document.getElementById("cw").innerHTML = "No";
-			}
-		}
-	</script>
-</head>
-<body>
-	<div class="topbar">
-		<h1>%SSID%</h1>
-	</div>
-	<div class="content">
-		<div class="cards">
-			<div class="card">
-				<p>DELAY</p>
-				<p><span class="status">
-					<span id="delay">%DELAY%</span>
-				</span></p>
-				<p>
-					<input onfocus="this.value=''" name="time" id="time" value="%DELAY%" type="number" />
-				%BUTTON1%
-				</p>
-			</div>
-			<div class="card">
-				<p>RANDOM DELAY</p>
-				<p><span class="status">
-					<span id="rand">%RANDSTAT%</span>
-				</span></p>
-				<p>%RANDBOX%</p>
-			</div>
-			<div class="card">
-				<p>SEND CW</p>
-				<p><span class="status">
-					<span id="cw">%CWSTAT%</span>
-				</span></p>
-				<p>%CWBOX%</p>
-			</div>
-			<div class="card">
-				<p>ALTERNATE CW/VOICE</p>
-				<p><span class="status">
-					<span id="alt_cw">%ALTCWSTAT%</span>
-				</span></p>
-				<p>%ALTCWBOX%</p>
-			</div>
-			<div class="card">
-				<p>HUNTING</p>
-				<p><span class="status">
-					<span id="hunting">%HUNTING%</span>
-				</span></p>
-				<p>%BUTTON2% %BUTTON3%</p>
-			</div>
-			<div class="card">
-				<p>RADIO</p>
-				<p><span class="status">
-					<span id="power">%POWER%</span>
-				</span></p>
-				<p>%BUTTON4% %BUTTON5%</p>
-			</div>
-			<div class="card">
-				<p>PTT</p>
-				<p><span class="status">
-					%BUTTON6%
-				</span></p>
-			</div>
-			<div class="card">
-				<p>TRANSMIT IN</p>
-				<p><span class="status">
-					<span id="transmit">%TX%</span>
-				</span></p>
-			</div>
-		</div>
-	</div>
-</body>
-</html>
-)rawliteral";